Video: Murdered-Out Twin-Engined Death Rod Is Insanely Beautiful

In some cases, a slew of random images just don’t do a build any justice. Case in point, this well-done footage of Yannick Sire’s dual-engined, open-wheeled speed machine. As a gearhead, you’re probably well aware that the birth of hot rodding was nurtured from the sunny west coast of Southern California. It’s there you’ll find custom rod builders like George Barris and the infamous S0-Cal Speed Shop.

Following along in their footsteps, Yannick Sire is not only taking inspiration from those before him but indeed, pushing it beyond most peoples comfort levels. We couldn’t help but post such an amazing build. Although this might not run bottom 11s at the track or clip an amazing lap time during an autocross course, its pretty awesome.

If this doesn’t inspire you, we aren’t quite sure what will. For the most part, we’ll let the video do most of the talking on this one. West Los Angeles rod builder, Yannick Sire has reinvigorated the West Coast’s tradition of radical street rodding with his full-custom hot rod, a hybrid creation of many different parts from different cars.

Sire, is truly an inspirational genius. Sire even hand-crafted each of the 16 individual header tubes himself.

The real trademark, however, of Sire’s custom rod are the two, 450-horse Chevy small-blocks, both outfitted with a heavy-breathing set of Air Flow Research (AFR) cylinder heads. Not only does this combination sound amazing, its equaling out to fire-breathing 16 cylinders.

Sire’s wheel choice consists of a 20 x 9.5-/20 x 10.5-inch front/rear combination from an ’02-’03, BMW X5. The Continental tires are P275/35R20 and P315/35R20, respectively. The front suspension uses custom, unequal length A-arms with second-gen Camaro, two-inch drop spindles.

Since slowing down is just as, if not more important, Sire upgraded the braking system to 14-inch Corvette Z06 on all four corners. Stering is handled by a Subaru STI rack-and-pinion. At the front of Sire’s V16 rod are a set of QA1 coilovers with a rate of 650 lb/in, and the completed vehicle weighs in at an estimated 2500 pounds.

For the last several years in the performance craft, we’ve had made the general statement that there are two ways to make any car or truck go fast: make it lighter or else more powerful. In the case of Yannick Sire and his 16-cylinder hot rod, both principles have been exercised to the absolute extreme!