1,200-HP 260 CI Twin Turbo LS Full-Throttle On The Dyno For 5 Mins

Often times, when someone is boasting about how much power their engine made, it only made that number once and under ideal conditions. However, when you are using the engine for a specific purpose, a moon-shot dyno sheet that you can use to impress people online doesn’t mean much. How the engine performs in use is where it matters.

Sometimes, the requirements for the performance envelope are a bit more extreme than usual. Enter champion jet boat racer Mark Rodacker and his collaboration with Tom Nelson of Nelson Racing Engines. Rodacker approached NRE with a unique rulebook to follow, and set of durability requirements.

“The class rules allow 470 cubic-inches, naturally aspirated,” explains Nelson of the River Racing Jet Boat ruleset. “Then, there’s a little clause in there that says you can run twin-turbos if the engine is 260 cubes or less. I felt like we could make way more power with a twin-turbo LS than with 470 cubic-inches naturally aspirated in this class.”

Running a pair of NRE’s Gen-2 mirror image ball-bearing turbochargers on a 260 cubic-inch makes for a solid combination. While the full spec-sheet hasn’t been released, as you can see, a Holley EFI throttle body and intake manifold are used, along with a TiAL blowoff valve.

However, more than just building an engine to exploit the rulebook, Rodacker has a very specific set of durability criteria for the LS engine – to be able to run wide open on the dyno for five minutes at a time. To compound that insane feat, it had to be done a dozen times.

“We’re going to attempt to make a twin-turbo LS run flat out at full boost and wide open throttle.” says Nelson. “We’ve got to run this thing for five minutes, at wide-open-throttle, under boost, at over 7,000 rpm. This engine is really a prototype to see if this is possible.”

While the full build sheet isn’t for public consumption yet, Nelson does reveal a couple of the more interesting points of the build. “This thing is filled with goodies,” he laughs. “We’ve got NRE Gen 2 60mm ball bearing turbos and an insane big oil cooler, because when you run for this long things get hot.”

When Nelson calls something “insane”, you know it has to be impressive. Because of the engine’s intended application, the extensive use of water-cooling helps keep the massive temperatures generated by extended WOT runs in check. “We have water running through the oil cooler, and double-wall water-cooled headers.”

The combination is run by a Holley EFI box that appears to be some variant of the Terminator ECU. “Holley has been really involved in this project. We’ve got scramble boost both up and down, so he can push a button and pick up another 200 horsepower to get around someone, and if he just wants to cruise and save the engine, he can bump it down 200 horsepower,” says Nelson. “The engine can vary from 800 to 1,200 horsepower during the race with a couple button presses.”

Holley EFI has played a large role in controlling this combination and its unique requirements. One of the cool features is the scramble boost up and down feature, allowing the engine to be pushed harder or dialed back, depending on the race situation.

While the power numbers for the engine are impressive – 1,200 horsepower from only 260 cubic inches makes for a stout 4.61 horsepower-per-cubic-inch (281.69 horsepower per liter, for you metric types) – the main goal is endurance.

“It’s a crazy combo. 260 cubes making 1200 horsepower on an endurance level. The power numbers are killer, and way better than anything anyone is making naturally aspirated in the class,” says Nelson. “But the question is, can this engine survive and live. That’s what we’re testing here with these long, long pulls.”

Watching the video above, that is only the first five-minute-long pull of twelve scheduled. There’s something about a five-minute-long dyno pull that is both mesmerizing and terrifying at the same time. Then realize, that is only about eight percent of the full hour of WOT, full-boost, 7,000-plus rpm that will be required to prove this engine design.

7,300-plus rpm, banging off the rev-limiter, at full-boost from the two 60mm turbos, for five full minutes at a time is no small matter. Even land-speed racers don’t spend that much time at WOT over the five-mile course.

Article Sources

About the author

Greg Acosta

Greg has spent fifteen years and counting in automotive publishing, with most of his work having a very technical focus. Always interested in how things work, he enjoys sharing his passion for automotive technology with the reader.
Read My Articles

Hardcore Chevys in your Inbox.

Build your own custom newsletter with the content you love from Chevy Hardcore, directly to your inbox, absolutely FREE!

Free WordPress Themes
Chevy Hardcore NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

We'll send you the most interesting Chevy Hardcore articles, news, car features, and videos every week.

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

Chevy Hardcore NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...



Hot Rods & Muscle Cars

Corvette Enthusiasts

Street Rods

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • Hot Rods & Muscle Cars
  • Corvette Enthusiasts
  • Street Rods

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

Thank you for your subscription.

Thank you for your subscription.

Chevy Hardcore - The #1 Performance Bowtie Online Magazine

Thank you for your subscription.

Thank you for your subscription.

Loading