Speed Tech Performance’s new TRACK TIME Suspension Kit offers full Road/Track Suspension Setup for 1967-1969 Camaro/Firebirds. It has extra adjustments built into the frame to fine-tune suspension, and it can fit small and big blocks that have the original oil pan.

Official Release:

Speed Tech Performance Offers the TRACK TIME Suspension Kit for the Ultimate FULL Road/Track Suspension Setup.

FITMENT:

1967-1969 Camaro/Firebird

Sub Frame Features:

• High Clearance control arms have been tested to fit up to a 10” 295 wheel/tire with a 7″ back space
• A true coil over combination
• Available Air Ride Shock Wave 3.0 (SKW1000) bolt in
• Direct bolt on any factory replacement tubular control arms that worked with your original frame
• Extra adjustments built into the frame to fine-tune your suspension
• Fully-adjustable transmission crossmember fits all GM Transmissions also T56 and TKO
• Power Rack-and-Pinion steering
• Strong box construction, laser-cut and jig-welded
• Reduced weight: subframe weight only 125 pounds
• Factory-alignment hole to ease in the installation and alignment of the subframe
• Built in tow/ tie-down hook mounts, no more wrapping tie downs around your painted frame
• Increased header and exhaust clearance
• Can reuse your existing sway bar if you are reusing your aftermarket control arms
• Fits Small and Big Blocks with original oil pan
• Fits LSx engines with aftermarket oil pan and motor mounts (available as an option)

BENEFITS:

• Direct bolt-in/ no modifications to be made
• Lighter/stronger design with upgraded suspension geometry and built-in guild strand mod
• Upgraded Power Rack and Pinion included
• Adjustable ride height with QA1 Coil over’s included or Air Ride Shock Waves option
• Increase engine- and under-vehicle clearance
• Increased front-wheel size for up to a 10” 295mm front tire
• Customers can reuse their stock spindles, brakes and wheels
• Accepts Small Blocks, Big Blocks or LS Engines

Torque Arm Rear Suspension:

• Articu-link Lower Control Arms with Delrin Bushings
• Fits both 9” and 12 Bolt Differentials
• Includes QA1 Adjustable Coil-Over Shocks
• Adjustable Roll Center Pan Hard Bar
• Adjustable Ride Height
• Adjustable Pinion Angle
• Adjustable Instant Center Location
• Adjustable Wheelbase

BENEFITS:

• Requires NO Cutting of Any Floor to Install
• Eliminates Any Suspension Bind
• Will Accept Air Ride Shocks
• Will Accept Stock Width up to 345 Tires on a 20” Rim

Full Strange Rear End:

• Strange 9″ Rear Housing with Suspension Brackets Welded on
• Your Choice of Width
• US Gear Posi. Your Choice of Gears
• 31 Spline Pro Street Axles

OPTIONS:

• AFX Tall Or Stock Height Forged Spindles
• Air Ride Shock Waves
• Double Adjustable QA1 coil over’s
• Baer or Wilwood brakes
• High-clearance, Stainless-steel, slip-fit headers and shaft kit
• Billet ball-joint covers
• Billet body mounts
• Complete Track Time Kit $9899